Services

Engineered for continuity.

Generation, storage, protection and the maintenance that keeps them working, delivered by one engineering team. Every system starts with a survey and is supported for as long as it runs.

01

Solar PV systems

Arrays specified from your consumption data, not a catalogue. We design the structure, string layout and protection, then install and commission to a standard we are prepared to maintain for years.

  • Grid-tie, off-grid and hybrid systems
  • Commercial rooftops with walkways and cleaning access
  • Borehole solarisation and solar pumping
  • Monitoring, cleaning and preventive maintenance

EquipmentLONGi · JA Solar · Jinko

Discuss your requirements
Rooftop solar array with access walkways on a commercial building in Nairobi
02

Inverters & energy storage

Inverter systems sized to the loads that matter, standalone or in parallel, with lithium storage that carries a building through an outage without anyone noticing it happened.

  • Hybrid and backup inverters, 3 kW to 15 kW and beyond
  • Three-phase and parallel configurations
  • Lithium storage from 5 kWh upward
  • Automatic changeover and protection

EquipmentDeye · SRNE · Studer · Mecer · Xantrex

Discuss your requirements
Wall-mounted hybrid inverter with two lithium battery modules
03

UPS systems

Uninterruptible power for theatres, server rooms and banking halls. We size, install and commission new systems and repair the ones already in service, including 30 to 100 kVA units.

  • Critical-load assessment and sizing
  • Installation and commissioning, 400 VA to 1 MVA
  • Major repairs and battery bank replacement
  • Data-centre battery replacement programmes

EquipmentAPC · Eaton · MGE · Liebert · INVT · GE · Tripp Lite

Discuss your requirements
Row of tower UPS cabinets installed in a plant room
04

Solar water heating & heat pumps

Hot water without the electricity bill. Flat-plate solar systems and heat pumps, plumbed into the existing installation and serviced on schedule, from city residences to safari camps.

  • Solar water heating from 200 litres
  • Heat pump installation
  • Integration with existing plumbing
  • Servicing of installed systems
Discuss your requirements
Flat-plate solar water heater with storage tank on a red tile roof
05

Generators, AVRs & changeover

Clean, stable supply for equipment that cannot tolerate fluctuation. Generators, automatic voltage regulators and changeover arrangements designed as one system.

  • Generator supply and installation
  • Automatic voltage regulators, 20 to 60 kVA
  • Manual bypass and automatic changeover
  • Isolation and surge protection
Discuss your requirements
Automatic voltage switcher and rotary isolator mounted on a plant wall
06

Battery supply & replacement

Correctly specified replacement batteries for UPS and inverter systems of every make, installed, tested and disposed of properly.

  • 12 V to 48 V systems
  • 4.5 Ah to 760 Ah capacity
  • AGM, GEL and lithium chemistry
  • Bank testing and safe disposal
Discuss your requirements
Technician connecting cables during a battery bank replacement
07

CCTV, cabling & ICT supply

The low-voltage layer that sits alongside the power system: surveillance, structured cabling and the hardware that runs on it.

  • CCTV design and installation
  • Structured data and electrical cabling
  • Computers, laptops and printers
  • Projectors and accessories
Discuss your requirements
  • CCTV design and installation
  • Structured data and electrical cabling
  • Computers, laptops and printers
  • Projectors and accessories
08

Maintenance contracts

Systems stay reliable because someone looks after them. Preventive maintenance on a fixed schedule, with response when it matters, for single sites and multi-site networks.

  • UPS, inverter, solar and generator servicing
  • Fixed-schedule preventive maintenance
  • Multi-site contracts across Kenya
  • Rapid response for critical faults
Discuss your requirements
Engineer in hard hat servicing a wall-mounted power unit
How we work

Four stages. One accountable team.

  1. 01

    Survey

    An engineer visits, measures the loads and reviews what is already installed. There is no charge for the assessment.

  2. 02

    Design

    We specify the system, equipment and protection, and issue a written proposal you can hold us to.

  3. 03

    Install & commission

    Our own technicians install, test under load and hand over with full documentation.

  4. 04

    Maintain

    Preventive maintenance on a schedule, and response when it matters, for the life of the system.

Who we serve

Sectors where power is not optional.

  • Hospitals & clinics
  • Banks & microfinance
  • Oil & fuel
  • Schools & colleges
  • Internet providers
  • Security firms
  • Radio & broadcast
  • Manufacturing
  • Motor trade
  • Construction
  • Food production
  • Private residences
Authorised supply

Genuine equipment, full warranty.

  • APC
  • Eaton
  • MGE
  • Mecer
  • Studer
  • Liebert
  • INVT
  • Su-Kam
  • Scott
  • GE
  • Tripp Lite
  • Xantrex
  • Deye
  • SRNE
  • LONGi
  • JA Solar
  • Jinko
  • Vestwood
Next step

Start with a site assessment.

We survey the site, measure the loads and return a written proposal with equipment, costs and timelines. There is no charge and no obligation.